Ram Clear (Function 07); Fcu Reboot; Service Station Fax Number (Function 09) - Gestetner A265 Service Manual

SERVICE LEVEL FUNCTIONS

4.1.14 RAM CLEAR (FUNCTION 07)

1. Enter the fax service mode.
2. Press ( ..
3. Press one of the following numbers, as required:
) Initializes the bit switches and user parameters, user data in the SRAM,
files in the SAF memory, and the clock.
' Erases all the files stored in the SAF memory.
* Resets the bit switches and user parameters.
+ Initializes the bit switches and user parameters, user data in the SRAM,
and files in the SAF memory.
4. The machine automatically returns to standby mode after self-initialization.

4.1.15 FCU REBOOT

To initialize the fax unit without erasing files or resetting the bit switches, do one of
the following:
• Hold down the "Speed Dial" key for more than 10 s, while the machine is in
facsimile mode. This initializes the fax unit only.
• Remove the rear cover and press SW2 on the FCU. This initializes the fax unit
only.
• Turn off the main power and operation switches and turn them back on. This
initializes the whole machine.
• Hold down the 1 and 2 keys for more than 10 s. This initializes the whole
machine.

4.1.16 SERVICE STATION FAX NUMBER (FUNCTION 09)

1. Enter the fax service mode.
2. Press ( 3.
3. Enter the fax number of the service station
that will receive Automatic Service Calls
from this machine. To use a G4 number,
press the "F4" key.
4. Press "OK".
5. Exit the service mode.
A265/A267
CÓPIA NÃO CONTROLADA
4-8
CÓPIA NÃO CONTROLADA
A895M520.BMP
A895M521.BMP
SM