SERVICE MENU
SERVICE TOOLS
H
HDD Test
⇒
I
HDD Format
4.3 SERVICE MENU
4.3.1 BIT SWITCH PROGRAMMING
1. Enter the Printer SP mode, and select "1. Service Menu".
2. Select A, B, C, or D for the desired bit switch, then press [Enter].
3. Press [Enter] in the "Bit Switch Set" menu.
4. Adjust the bit switch using the following keys.
• [UP] [DOWN]: Change the switch setting and moves to the next bit.
• [CANCEL]: Exit without saving changes.
• [ENTER]: Exit and save changes.
5. Press [Enter] to save changes and exit.
BIT SWITCHES
NOTE: The bit switches are not used at the moment.
A265/A267
CÓPIA NÃO CONTROLADA
Title
Verifies the FAT and directory entries on the HDD.
Partitions and formats the HDD.
CÓPIA NÃO CONTROLADA
Description
4-2
Rev. 09/2000
SM