Show Interfaces Counters - Cisco Catalyst 2950 Command Reference Manual

show interfaces counters

show interfaces counters
Use the show interfaces counters privileged EXEC command to display various counters for a specific
interface or for all interfaces.
Syntax Description interface-id
vlan vlan-id
broadcast
errors
multicast
trunk
unicast
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
If you do not enter any keywords, all counters for all interfaces are included.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2950 Desktop Switch Command Reference
2-164
show interfaces [interface-id | vlan vlan-id] counters [broadcast | errors | multicast | trunk |
unicast] [ | {begin | exclude | include} expression]
(Optional) ID of the physical interface, including type and slot and port
number.
(Optional) VLAN number of the management VLAN. Valid IDs are from 1
to 4094 when the enhanced software image (EI) is installed and 1 to 1001
when the standard software image (SI) is installed. Do not enter leading
zeros.
(Optional) Display discarded broadcast traffic.
(Optional) Display error counters.
(Optional) Display discarded multicast traffic.
(Optional) Display trunk counters.
(Optional) Display discarded unicast traffic.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Chapter 2 Cisco IOS Commands
78-11381-05