Show Interfaces Counters - Cisco ME 3800X Command Reference Manual

Chapter

show interfaces counters

To display various counters for the switch or for a specific interface, use the show interfaces counters
command in privileged EXEC mode.
Syntax Description interface-id
errors
trunk
module switch- number (Optional) Displays counters for the specified switch number. The only
etherchannel
protocol status
| begin
| exclude
| include
expression
Though visible in the command-line help string, the vlan vlan-id keyword is not supported.
Note
Command Modes
Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines If you do not enter any keywords, all counters for all interfaces are included.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
OL-28238-01
show interfaces [interface-id | vlan vlan-id] counters [errors | trunk] [module switch- number] |
etherchannel | protocol status] [ | {begin | exclude | include} expression]
(Optional) ID of the physical interface, including type, module, and port
number.
(Optional) Displays error counters.
(Optional) Displays trunk counters.
available value is 1.
(Optional) Displays EtherChannel counters, including octets, broadcast
packets, multicast packets, and unicast packets received and sent.
(Optional) Displays status of protocols enabled on interfaces.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3800X and ME 3600X Switch Command Reference
show interfaces counters
-71