Show Interfaces Counters - Cisco ME 3400 Command Reference Manual

show interfaces counters

show interfaces counters
Use the show interfaces counters privileged EXEC command to display various counters for the switch
or for a specific interface.
Syntax Description interface-id
errors
trunk
module switch- number (Optional) Display counters for the specified switch number. The only
etherchannel
protocol status
| begin
| exclude
| include
expression
Though visible in the command-line help string, the vlan vlan-id keyword is not supported.
Note
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines If you do not enter any keywords, all counters for all interfaces are included.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of partial output from the show interfaces counters command. It displays all
counters for the switch.
Switch# show interfaces counters
Port
Fa0/1
Fa0/2
<output truncated>
Cisco ME 3400 Ethernet Access Switch Command Reference
2-450
show interfaces [interface-id | vlan vlan-id] counters [errors | trunk] [module switch- number] |
etherchannel | protocol status] [ | {begin | exclude | include} expression]
(Optional) ID of the physical interface, including type, module, and port
number.
(Optional) Display error counters.
(Optional) Display trunk counters.
available value is 1.
(Optional) Display EtherChannel counters, including octets, broadcast
packets, multicast packets, and unicast packets received and sent.
(Optional) Display status of protocols enabled on interfaces.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
InOctets
0
0
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
InUcastPkts InMcastPkts
0
0
InBcastPkts
0 0
0 0
OL-9640-10