Displaying Online Diagnostic Tests And Test Results - Cisco Catalyst 2360 Software Configuration Manual

Running Online Diagnostic Tests

Displaying Online Diagnostic Tests and Test Results

You can display the online diagnostic tests that are configured for the switch and check the test results
by using the privileged EXEC show commands in
Table 29-1 Commands for Diagnostic Test Configuration and Results
Command
show diagnostic content
show diagnostic status
show diagnostic result [detail | test {name | test-id |
test-id-range | all} [detail]]
show diagnostic [detail]
show diagnostic schedule
show diagnostic post
For examples of the show diagnostic command output, see the "Examples" section of the show
diagnostic command in the command reference for this release.
Catalyst 2360 Switch Software Configuration Guide
29-6
Table 29-1:
Purpose
Display the online diagnostics configured for a switch.
Display the currently running diagnostic tests.
Display the online diagnostics test results.
Display the online diagnostics test results.
Display the online diagnostics test schedule.
Display the POST results. (The output is the same as the show post
command output.)
Chapter 29 Configuring Online Diagnostics
OL-19808-01