To set up network printer connections
When the oscilloscope is connected to a LAN, you can set up network
printer connections.
A network printer is a printer attached to a computer or print server on
the network.
1 Press the [Print] key on the front panel.
2 In the Print Configuration Menu, press the Print to softkey; then, turn
3 Press the Network Setup softkey.
4 In the Network Printer Setup Menu:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
the Entry knob to select the network printer you want to configure
(either #0 or #1).
a Press the Address softkey.
b In the Address keypad dialog, you can enter text using:
The touch screen (when the front panel [Touch] key is lit).
•
•
The
Entry knob. Turn the knob to select a key in the dialog;
then, push the
•
A connected USB keyboard.
•
A connected USB mouse — you can click anything on the screen
that can be touched.
The Address is the printer or print server's address in one of the
following formats:
•
IP address of a network- enabled printer (for example:
192.168.1.100 or 192.168.1.100:650). Optionally, a non- standard
port number can be specified following a colon.
•
IP address of a print server followed by the path to the printer
(for example: 192.168.1.100/printers/printer- name or
192.168.1.100:650/printers/printer- name).
•
Path to a Windows network printer share (for example: \\server\
share).
c When you are done entering text, select the dialog's Enter or OK key
or press the Address softkey again.
Entry knob to enter it.
19
Print (Screens)
325