27
MIL-STD-1553/ARINC 429 Triggering and Serial Decode
Searching for ARINC 429 Data in the Lister
The oscilloscope's search capability lets you search for (and mark) certain
types of ARINC 429 data in the Lister. You can use the [Navigate] key and
controls to navigate through the marked rows.
1 With ARINC 429 selected as the serial decode mode, press [Search].
2 In the Search Menu, press the Search softkey; then, turn the Entry knob
3 Press Search; then, select from these options:
For more information on searching data, see
page 146.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base"
460
to select the serial slot (Serial 1 or Serial 2) on which the ARINC 429
signal is being decoded.
Label — finds the specified label value.
•
Label values are always displayed in octal.
Label + Bits — finds the label and the other word fields as specified.
•
Parity Error — finds words with a parity error.
•
Word Error — finds an intra- word coding error.
•
Gap Error — finds an inter- word gap error.
•
Word or Gap Error — finds either a Word or Gap Error.
•
All Errors — finds any of the above errors.
•
on page 75.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"Searching Lister Data"
on