Agilent Technologies 4000 X-Series User Manual page 324

19
Print (Screens)
5 Press the Palette softkey to select the print palette. See
6 Press the Press to Print softkey.
You can stop printing by pressing the Cancel Print softkey.
The oscilloscope will print the last menu visited before you pressed the [Print] key.
N O T E
Therefore, if you have measurements (Amplitude, Frequency, etc.) showing on the display
before you press [Print], the measurements will be shown on the printout.
To print the display showing the Print Configuration Menu at the bottom, press the [Print]
key twice; then, press the Press to Print softkey.
You can also configure the [Quick Action] key to print the display. See
"Configuring the [Quick Action] Key"
See Also •
324
See "To specify the print options"
palette option" on page 327.
"To add an annotation"
on page 326.
on page 347.
on page 162
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"To specify the