To Save Lister Data Files; To Save Reference Waveform Files To A Usb Storage Device - Agilent Technologies 4000 X-Series User Manual

Data File Format
BIN
ASCII XY
CSV
See Also
•
•
•

To save Lister data files

Lister data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.

To save reference waveform files to a USB storage device

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Save softkey.
3 In the Save Menu, press the Format softkey and turn the Entry knob to
4 Press the Source softkey and turn the Entry knob to select the source
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
Lister data file.
navigate to the save location. See
page 317.
In the File Settings Menu, you have these softkeys and options:
Setup Info — when enabled, setup information (vertical, horizontal,
•
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
A message indicating whether the save was successful is displayed.
select Reference Waveform data (*.h5) .
waveform.
Save/Recall (Setups, Screens, Data)
Save Times
fastest
medium
slowest
on page 377
on page 384
"To navigate storage locations"
on page 385
on
18
315