10
Triggers
5 In the Zone Qualified Trigger Menu, press the Source softkey and select
6 You can use the Zone 1 On and Zone 2 On softkeys to disable or enable
202
The [Zone] key becomes lit to show the zone qualified trigger feature is
enabled.
the analog channel input source that both zones are associated with.
Zone colors match the selected analog input channel. "Must Not
Intersect" zones are shaded differently than the solid "Must Intersect"
zones.
The zone qualified trigger source does not have to be the same as the
hardware trigger source.
zones, and you can use the Zone 1 and Zone 2 softkeys to toggle between
the "Must Intersect" and "Must Not Intersect" conditions.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide