18
Save/Recall (Setups, Screens, Data)
5 Press the softkey in the second position and use the Entry knob to
6 Finally, press the Press to Save softkey.
To save masks
Mask files can be saved to one of four internal (\Agilent Flash) locations
or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Mask files have the extension MSK.
Masks are also saved as part of setup files. See
N O T E
See Also
•
To save arbitrary waveforms
Arbitrary waveform files can be saved to one of four internal (\Agilent
Flash) locations or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
316
navigate to the save location. See
page 317.
A message indicating whether the save was successful is displayed.
Mask (*.msk).
navigate to the save location. See
page 317.
A message indicating whether the save was successful is displayed.
Chapter
15, "Mask Testing," starting on page 271
Arbitrary Waveform data (*.csv).
navigate to the save location. See
page 317.
"To navigate storage locations"
"To navigate storage locations"
"To save setup files"
"To navigate storage locations"
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on
on
on page 311.
on