Edge Then Edge Trigger - Agilent Technologies 4000 X-Series User Manual

10
Triggers
Using AutoScale The easiest way to set up an Edge trigger on a waveform is to use
to Set Up Edge AutoScale. Simply press the [AutoScale] key and the oscilloscope will
Triggers
attempt to trigger on the waveform using a simple Edge trigger type. See
"Use Auto Scale"
MegaZoom Technology Simplifies Triggering
N O T E
With the built-in MegaZoom technology, you can simply AutoScale the waveforms, then
stop the oscilloscope to capture a waveform. You can then pan and zoom through the data
using the Horizontal and Vertical knobs to find a stable trigger point. AutoScale often
produces a triggered display.

Edge then Edge Trigger

The Edge then Edge trigger mode triggers when the Nth edge occurs after
an arming edge and a delay period.
The arm and trigger edges can be specified as
edges on analog or digital channels.
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
170
on page 33.
to select Edge then Edge.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
(Rising) or (Falling)