Table of Contents
Advertisement
Information about controlling the oscilloscope through remote commands
is contained in the Programmer's Guide, which is included on the
documentation CD supplied with this oscilloscope. You can also access this
document on the Agilent web site.
For more information about connecting to the oscilloscope, refer to the
Agilent Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a
printable electronic copy of the Connectivity Guide, direct your Web
browser to
Save/Recall
You can save setup files, screen images, waveform data files, or mask files
to your PC via the oscilloscope's web interface (see
Web Interface"
You can recall setup files, reference waveform data files, or mask files
from your PC via the oscilloscope's web interface (see
the Web Interface"
Saving Files via the Web Interface
To save setup files, screen images, waveform data, Lister data, or mask
files to your PC via the oscilloscope's web interface:
1 Access the oscilloscope's web interface (see
2 When the oscilloscope's web interface is displayed, select the Save/Recall
3 Click the Save link.
4 On the Save page:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"www.agilent.com"
on page 357).
on page 358).
Interface"
on page 350).
tab from the left side of the Welcome screen.
a Enter the name of the file you are saving to.
b Select the format.
and search for "Connectivity Guide".
"Accessing the Web
Web Interface
"Saving Files via the
"Recalling Files via
21
357
Hide quick links:
Advertisement
Table of Contents
