Measurement Window; Measurement Statistics - Agilent Technologies 4000 X-Series User Manual

Measurement Window

You can choose whether measurements are made in the Main window
portion of the display, the Zoom window portion of the display (when the
zoomed time base is displayed), or gated by the X1 and X2 cursors.
1 Press the [Meas] key.
2 In the Measurement Menu, press the Settings softkey.
3 In the Measurement Settings Menu, press the Meas Window softkey; then,

Measurement Statistics

To display measurement statistics:
1 Press the [Meas] key to enter the Measurement Menu. By default
2 Select the measurements you desire for the channels you are using (see
3 From the Measurement Menu, press the Statistics softkey to enter the
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Decreasing the upper value below the set middle value will
automatically decrease the middle value to be less than the upper value.
The default upper threshold is 90% or 1.50 V.
• If threshold Type is set to %, the upper threshold value can be set
from 2% to 100%.
turn the Entry knob to select from:
Auto Select — When the zoomed time base is displayed, the
•
measurement is attempted in the lower, Zoom window; if it cannot be
made there, or if the zoomed time base is not displayed, the Main
window is used.
Main — The measurement window is the Main window.
•
Zoom — The measurement window is the lower, Zoom window.
•
Gated by Cursors — The measurement window is between the X1 and
•
X2 cursors. When the zoomed time base is displayed, the X1 and X2
cursors in the Zoom window portion of the display are used.
frequency and peak- to- peak voltage are measured on channel 1.
"Measurements Summary"
Statistics Menu.
on page 244).
14
Measurements
267