To Navigate Storage Locations; To Enter File Names - Agilent Technologies 4000 X-Series User Manual

See Also •

To navigate storage locations

When saving or recalling files, the softkey in the second position of the
Save Menu or Recall Menu, along with the Entry knob, are used to
navigate to storage locations. The storage locations can be internal
oscilloscope storage locations (for setup files or mask files) or they can be
external storage locations on a connected USB storage device.
The softkey in the second position can have these labels:
• Press to go — when you can push the Entry knob to navigate to a new
• Location — when you have navigated to the current folder location (and
• Save to — when you can save to the selected location.
• Load from — when you can recall from the selected file.
When saving files:
• The proposed file name is shown in the Save to file = line above the
• To overwrite an existing file, browse to that file and select it. To create

To enter file names

To create new file names when saving files to a USB storage device:
1 In the Save Menu, press the File Name softkey.
2 In the File Name Menu, press the File Name softkey.
3 In the File Name keypad dialog, you can enter file names using:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
A message indicating whether the save was successful is displayed.
"To edit arbitrary waveforms"
folder or storage location.
are not saving files).
softkeys.
a new file name, see
You must have a USB storage device connected to the oscilloscope for
this softkey to be active.
The touch screen (when the front panel [Touch] key is lit).
•
• The Entry knob. Turn the knob to select a key in the dialog;
then, push the
Save/Recall (Setups, Screens, Data)
on page 291
"To enter file names"
Entry knob to enter it.
on page 317.
18
317