Agilent Technologies 4000 X-Series User Manual page 117

4
Math Waveforms
Use the More Chart softkey to open a submenu for specifying the analog
value equivalent of each bus value increment, the analog equivalent of a
zero bus value, and the type of values the charted bus data represents
(volts, amps, etc.).
Use the Units/Code softkey to specify the analog value equivalent of each
increment in the bus data value.
Use the 0 Offset softkey to specify the analog value equivalent of a bus data
value of zero.
Use the Units softkey to specify the type of values the bus data represents
(volts, amps, etc.).
See Also
• "Chart Logic Bus Timing" on page 115
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 117