Setting The Oscilloscope's Clock - Agilent Technologies 4000 X-Series User Manual

20
Utility Settings

Setting the Oscilloscope's Clock

The Clock Menu lets you set the current date and time of day (24- hour
format). This time/date stamp will appear on hardcopy prints and
directory information on the USB mass storage device.
To set the date and time, or to view the current date and time:
1 Press [Utility] > Options > Clock.
2 Press the Year, Month, Day, Hour or Minute softkey; then, rotate the Entry
The hours are shown in the 24- hour format. So 1:00 PM is hour 13.
338
Channel coupling is maintained to allow easy viewing of oscillating
signals.
• Press the Channels softkey and turn the Entry knob to specify the
channels to be autoscaled:
All Channels — The next time you press [AutoScale], all channels that
•
meet the requirements of AutoScale will be displayed.
Only Displayed Channels — The next time you press [AutoScale], only
•
the channels that are turned on will be examined for signal
activity. This is useful if you only want to view specific active
channels after pressing [AutoScale].
Press the Acq Mode softkey and turn the Entry knob to select whether
•
the acquisition mode should be preserved during autoscale:
Normal — to make the oscilloscope switch to Normal acquisition
•
mode whenever the [AutoScale] key is pressed. This is the default
mode.
Preserve — to make the oscilloscope remain in the acquisition mode
•
you have chosen when the [AutoScale] key is pressed.
knob to set to the desired number.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide