Agilent Technologies 4000 X-Series User Manual page 434

25
I2C/SPI Triggering and Serial Decode
3 Press Search; then, select from these options:
4 Press the Bits softkey to open the SPI Bits Search Menu.
5 In the SPI Bits Search Menu, use the Words softkey to specify the
For more information on searching data, see
page 146.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base"
434
• Master-Out, Slave-In (MOSI) Data — for searching MOSI data.
Master-In, Slave-Out (MISO) Data — for searching MISO data.
•
number of words in the data value; then, use the remaining softkeys to
enter the hex digit values.
on page 75.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"Searching Lister Data" on