One reference waveform can be displayed at a time.
Reference waveforms are always drawn as vectors (that is, lines between
waveform data points) and may look different than waveforms drawn as
dots (if that option is available in your oscilloscope).
See Also
•
To scale and position reference waveforms
1 Make sure the multiplexed scale and position knobs above and below
2 Turn the upper multiplexed knob to adjust the reference waveform
3 Turn the lower multiplexed knob to adjust the reference waveform
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"To display reference waveform information"
the [Ref] key are selected for the reference waveform.
If the arrow to the left of the [Ref] key is not illuminated, press the key.
scale.
position.
Reference Waveforms
on page 122
5
121