Agilent Technologies 4000 X-Series User Manual page 37

5. Waveform keys
4. Entry knob
3. [Intensity] key
2. Softkeys
1. Power switch
21. Waveform
generator
outputs
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
6. Trigger controls
20. EXT TRIG IN
connector
1. Power switch Press once to switch power on; press again to switch power off. See
"Power-On the Oscilloscope"
2. Softkeys The functions of these keys change based upon the menus shown on the
display directly above the keys.
The
top of the hierarchy, the
oscilloscope information is shown instead.
3. [Intensity] key Press the key to illuminate it. When illuminated, turn the Entry knob to
adjust waveform intensity.
You can vary the intensity control to bring out signal detail, much like an
analog oscilloscope.
Digital channel waveform intensity is not adjustable.
More details about using the Intensity control to view signal detail are on
"To adjust waveform intensity"
7. Horizontal controls
19. USB 18. Demo 2, Ground,
Host and Demo 1
ports terminals
Back/Up key moves up in the softkey menu hierarchy. At the
Getting Started
8. Run Control keys
9. [Default Setup] key
10. [Auto Scale] key
11. Additional
waveform controls
12. Measure controls
13. File keys
14. Tools keys
15. [Help] key
16. Vertical controls
17. Analog
channel
inputs
on page 30.
Back/Up key turns the menus off, and
on page 149.
1
37