Agilent Technologies 4000 X-Series User Manual page 272

15
Mask Testing
5 Press Automask.
6 In the Automask Menu, press the Source softkey and ensure the desired
7 Adjust the mask's horizontal tolerance (± Y) and vertical tolerance
8 Press the Create Mask softkey.
272
analog channel is selected.
(± X). These are adjustable in graticule divisions or in absolute units
(volts or seconds), selectable using the Units softkey.
The mask is created and testing begins.
Whenever the Create Mask softkey is pressed the old mask is erased and
a new mask is created.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide