Agilent Technologies 4000 X-Series User Manual page 59

Analog channel
sensitivity
Status line
Trigger level
Analog
channels
and ground
levels
Digital channels
Measurement
statistics
Menu line
Softkeys
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Trigger point, Delay
time reference time
Figure 1 Interpreting the oscilloscope display
Status line The top line of the display contains vertical, horizontal, and trigger setup
information.
Display area The display area contains the waveform acquisitions, channel identifiers, and
analog trigger, and ground level indicators. Each analog channel's information
appears in a different color.
Signal detail is displayed using 256 levels of intensity. For more information
about viewing signal detail see
For more information about display modes see
starting on page 149.
Time/ Run/Stop Trigger
div status type
"To adjust waveform intensity"
Getting Started
Trigger
source
Trigger level or
digital threshold
Sidebar
information and
controls area
Measurements
Cursors defining
measurement
on page 149.
Chapter 8, "Display Settings,"
1
59