Agilent Technologies 4000 X-Series User Manual page 7

For reference information, see:
When using licensed serial bus
triggering and decode features, see:
Abbreviated instructions for pressing a series of keys and softkeys
T I P
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions
for pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as
follows:
Press [Key1] > Softkey2 > Softkey3.
The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly
below the oscilloscope display.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
• Chapter 22, "Reference," starting on page 367
• Chapter 23, "CAN/LIN Triggering and Serial Decode,"
starting on page 387
• Chapter 24, "FlexRay Triggering and Serial Decode,"
starting on page 405
• Chapter 25, "I2C/SPI Triggering and Serial Decode,"
starting on page 415
• Chapter 26, "I2S Triggering and Serial Decode,"
starting on page 435
• Chapter 27, "MIL-STD-1553/ARINC 429 Triggering and
Serial Decode," starting on page 445
• Chapter 28, "UART/RS232 Triggering and Serial
Decode," starting on page 461
• Chapter 29, "USB 2.0 Triggering and Serial Decode,"
starting on page 471
7