Setting a Password
Whenever you connect the oscilloscope to a LAN, it is good practice to set
a password. The password prevents someone from remotely accessing the
oscilloscope via a Web browser and changing parameters. Remote users
can still view the Welcome screen, view network status, etc., but they can't
operate the instrument or change its setup without the password.
To set a password:
1 Access the oscilloscope's web interface (see
2 When the oscilloscope's web interface is displayed, select the Configure
3 Click the Modify Configuration button.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Interface"
on page 350).
Network tab from the instrument's Welcome page.
Web Interface
"Accessing the Web
21
363