To Freeze The Display - Agilent Technologies 4000 X-Series User Manual

Having vectors on does not slow down the display rate.
Digital channels on a mixed- signal oscilloscope are not affected by the
Vectors setting. They are always displayed with vectors on. They also only
contain one acquisition worth of information.

To freeze the display

To freeze the display without stopping running acquisitions, you must
configure the [Quick Action] key. See
Key"
1 Once the [Quick Action] key has been configured, press it to freeze the
2 To un- freeze the display, press [Quick Action] again.
Manual cursors can be used on the frozen display.
Many activities, such as adjusting the trigger level, adjusting vertical or
horizontal settings, or saving data will un- freeze the display.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 347.
display.
"Configuring the [Quick Action]
8
Display Settings
155