Agilent Technologies 4000 X-Series User Manual page 261

Phase =
Source 1
Source 2
1 Press the [Meas] key to display the Measurement Menu.
2 Press the Source softkey; then turn the Entry knob to select the first
3 Press the Type: softkey; then, turn the Entry knob to select Delay.
4 Press the Settings softkey to select the second analog channel source for
5 Press the
6 Press the Add Measurement softkey to make the measurement.
The example below shows a phase measurement between the channel 1
and the math d/dt function on channel 1.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Delay
Source 1 Period × 360
analog channel source.
the phase measurement.
The default Phase settings measure from channel 1 to channel 2.
Back/Up key to return to the Measurement Menu.
Period
Delay
14
Measurements
261