Differential Probes - Agilent Technologies 4000 X-Series User Manual

22
Reference
Table 6
Model
1130A
N2750A
N2744A
N2795A
N2796A
1

Differential Probes

The following differential probes can be used with the InfiniiVision
4000 X- Series oscilloscopes.
Table 7 Differential Probes
Model
1130A
N2750A
N2790A
N2791A
N2792A
N2793A
372
Active Probes
Description
1.5 GHz InfiniiMax amplifier (with single-ended probe
head)
InfiniiMode active differential probe (in single-ended
modes), 1.5 GHz, 30 VDC + peak AC max with AutoProbe
interface
T2A probe interface adapter
Active probe, 1 GHz with AutoProbe interface
Active probe, 2 GHz with AutoProbe interface
See "AutoProbe Interface"
Description
1.5 GHz InfiniiMax amplifier (with differential probe head)
InfiniiMode active differential probe, 1.5 GHz, 30 VDC + peak AC max
with AutoProbe interface
High-voltage differential probe, 50:1 or 500:1 (switchable), 100 MHz with
AutoProbe interface
High-voltage differential probe, 25 MHz, +/-700 V, 1 MOhm termination,
10:1 or 100:1 (switchable)
Differential probe, 200 MHz 10:1, 50 Ohm termination
Differential probe, 800 MHz 10:1, +/-15 V, 50 Ohm termination
on page 370.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Quantity
1
Supported
4
4
Unknown,
depends on
probes
connected
4
4
Quantity
1
Supported
4
4
4