Agilent Technologies 4000 X-Series User Manual page 41

12.
13.
14.
15.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Measure The measure controls consist of:
controls • Cursors knob — Push this knob to select cursors from a popup menu.
Then, after the popup menu closes (either by timeout or by pushing
the knob again), rotate the knob to adjust the selected cursor
position.
• [Cursors] key — Press this key to open a menu that lets you select
the cursors mode and source.
• [Meas] key — Press this key to access a set of predefined
measurements. See
241.
File keys Press the [Save/Recall] key to save or recall a waveform or setup. See
Chapter
The [Print] key opens the Print Configuration Menu so you can print the
displayed waveforms. See
323.
Tools keys The Tools keys consist of:
• [Utility] key — Press this key to access the Utility Menu, which lets
you configure the oscilloscope's I/O settings, use the file explorer, set
preferences, access the service menu, and choose other options. See
Chapter
• [Quick Action] key — Press this key to perform the selected quick
action: measure all snapshot, print, save, recall, freeze display, and
more. See
• [Wave Gen1], [Wave Gen2] keys — Press these keys to access
waveform generator functions. See
Generator," starting on page 287.
[Help] key Opens the Help Menu where you can display overview help topics and
select the Language. See also
page 60.
Chapter 14, "Measurements," starting on page
18, "Save/Recall (Setups, Screens, Data)," starting on page 309.
Chapter
20, "Utility Settings," starting on page 329.
"Configuring the [Quick Action] Key"
"Access the Built-In Quick Help"
Getting Started
19, "Print (Screens)," starting on page
on page 347.
Chapter 17, "Waveform
1
on
41