Agilent Technologies 4000 X-Series User Manual page 4

The Agilent InfiniiVision 4000 X- Series oscilloscopes deliver these features:
• 200 MHz, 350 MHz, 500 MHz, 1 GHz, and 1.5 GHz bandwidth models.
• 2- and 4- channel digital storage oscilloscope (DSO) models.
• 2+16- channel and 4+16- channel mixed- signal oscilloscope (MSO)
• 12.1 inch SVGA touchscreen display. The touchscreen makes the
• Interleaved 4 Mpts or non- interleaved 2 Mpts MegaZoom IV memory
• All knobs are pushable for making quick selections.
• Trigger types: edge, edge then edge, pulse width, pattern, OR, rise/fall
• Serial decode/trigger options for: CAN/LIN, FlexRay, I
• Math waveforms: add, subtract, multiply, divide, FFT, d/dt, integrate,
4
models.
An MSO lets you debug your mixed- signal designs using analog signals
and tightly correlated digital signals simultaneously. The 16 digital
channels have a 1.25 GSa/s sample rate, with a 250 MHz toggle rate.
oscilloscope easier to use:
• You can "touch" inside alpha- numeric keypad dialogs to enter file,
label, network, and printer names, etc., instead of using softkeys and
the Entry knob.
• You can drag a finger across the screen to draw rectangular boxes
for zooming in on waveforms or setting up Zone triggers.
• You can touch the blue menu icon in the sidebar to display
information or control dialogs. You can drag (undock) these dialogs
out of the sidebar, for example, to view cursor values and
measurements at the same time.
• You can touch other areas of the screen as substitutes for using
front panel keys, softkeys, and knobs.
for the fastest waveform update rates, uncompromised.
time, Nth edge burst, runt, setup & hold, video, and zone.
UART/RS232, MIL- STD- 1553/ARINC 429, and USB. There is a Lister
for displaying serial decode packets.
square root, Ax+B, square, absolute value, common logarithm, natural
logarithm, exponential, base 10 exponential, low pass filter, high pass
filter, averaged value, magnify, measurement trend, chart logic bus
timing, and chart logic bus state.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
2 2
C/SPI, I S,