Recalling Setups, Masks, Or Data - Agilent Technologies 4000 X-Series User Manual

18
Save/Recall (Setups, Screens, Data)
4 When you are done entering the file name, select the dialog's Enter or
5 When available, the Increment softkey can be used to enable or disable

Recalling Setups, Masks, or Data

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select
You can also recall setups and mask files by loading them using the File
Explorer. See
You can also configure the [Quick Action] key to recall setups, masks, or
reference waveforms. See
page 347.
318
• A connected USB keyboard.
• A connected USB mouse — you can click anything on the screen that
can be touched.
OK key or press the File Name softkey again.
The file name appears in the softkey.
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
the type of file you want to recall:
Setup (*.scp) — See
•
Mask (*.msk) — See
•
Reference Waveform data (*.h5) — See
•
from a USB storage device"
Arbitrary Waveform data (*.csv) — See
•
page 320.
"File Explorer"
"To recall setup files"
"To recall mask files"
"To recall reference waveform files
on page 319.
"To recall arbitrary waveforms"
on page 333.
"Configuring the [Quick Action] Key"
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 319.
on page 319.
on
on