To Set Up Network Printer Connections - Agilent Technologies InfiniiVision 2000 X-Series User Manual

18
Print (Screens)
4 Press the Options softkey to select the print options.
5 Press the Palette softkey to select the print palette. See
6 Press the Press to Print softkey.
You can stop printing by pressing the Cancel Print softkey.
The oscilloscope will print the last menu visited before you pressed the [Print] key.
N O T E
Therefore, if you have measurements (Amplitude, Frequency, etc.) showing on the display
before you press [Print], the measurements will be shown on the printout.
To print the display showing the Print Configuration Menu at the bottom, press the [Print]
key twice; then, press the Press to Print softkey.
You can also configure the [Quick Action] key to print the display. See
"Configuring the [Quick Action] Key"
See Also
•

To set up network printer connections

When the DSOXLAN LAN/VGA module is installed, you can set up
network printer connections.
A network printer is a printer attached to a computer or print server on
the network.
1 Press the [Print] key on the front panel.
232
See "To specify the print options"
palette option" on page 235.
"Adding an Annotation"
on page 234.
on page 253.
on page 254
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"To specify the