To Edit Arbitrary Waveforms - Agilent Technologies 4000 X-Series User Manual

See:
•
•
•
•
•
•
•

To edit arbitrary waveforms

1 When Arbitrary is selected as the generated waveform type (see
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
"To output the waveform generator sync pulse"
"To specify the expected output load"
"To use waveform generator logic presets"
"To set up dual channel tracking"
"To add modulation to the waveform generator output"
"To add noise to the waveform generator output"
"To restore waveform generator defaults"
select generated waveform types and settings"
Edit Waveform softkey to open the Edit Waveform Menu.
Waveform Generator
on page 299
on page 300
on page 300
on page 307
on page 301
on page 307
on page 287), press the
17
on page 302
"To
291