Table of Contents
Advertisement
Math Operating Hints
T I P
If the analog channel or math function is clipped (not fully displayed on screen) the
resulting displayed math function will also be clipped.
Once the function is displayed, the analog channel(s) may be turned off for better viewing
of the math waveform.
The vertical scaling and offset of each math function can be adjusted for ease of viewing
and measurement considerations.
The math function waveform can be measured using [Cursors] and/or [Meas].
To adjust the math waveform scale and offset
1 Make sure the multiplexed scale and position knobs above and below
2 Use the multiplexed scale and position knobs above and below the
Math Scale and Offset are Set Automatically
N O T E
Any time the currently displayed math function definition is changed, the function is
automatically scaled for optimum vertical scale and offset. If you manually set scale and
offset for a function, select a new function, then select the original function, the original
function will be automatically rescaled.
See Also
•
Units for Math Waveforms
Units for each input channel can be set to Volts or Amps using the Units
softkey in the channel's Probe Menu. Units for math function waveforms
are:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
the [Math] key are selected for the math waveform.
If the arrow to the left of the [Math] key is not illuminated, press the
key.
[Math] key to re- size and re- position the math waveform.
"Units for Math Waveforms"
on page 91
4
Math Waveforms
91
Hide quick links:
Advertisement
Table of Contents
