Using the Network Analyzer to
3
Control the Test Set
This chapter assumes the following:
• The instructions in
• The test set and associated equipment are connected as shown in
This chapter shows you how the network analyzer can be used to
manually control the test set. The method presented here is considered
a manual one because the user manually enters individual commands
on a keyboard connected to the network analyzer. The chapter includes
the following sections:
•
•
•
•
•
•
Agilent Technologies Z5623A Option H48
Chapter 2 , "Installation,"
performed.
Figure 2-9 on page
2-15.
Preparing the Analyzer to Control the Test Set
How to Send a Manual Command
Common Errors in Manual Commands
A List of GPIB Commands
Restoring the Analyzer to its Normal Configuration
Disaster Recovery
have been
3-1