Agilent Technologies 4000 X-Series User Manual page 181

1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
3 Press the Source softkey, and turn the Entry knob to select the input
4 Press the Rising Edge or Falling Edge softkey to toggle between edge types.
5 Press the Level Select softkey to select High; then, turn the Trigger Level
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
High level
Low level
Rising edge time
to select Rise/Fall Time.
channel source.
knob to adjust the high level.
Falling edge time
10
Triggers
181