Triggers - Agilent Technologies 4000 X-Series User Manual

Infiniivision 4000 x-series

Hide thumbs Also See for 4000 X-Series:

Table of Contents

Agilent InfiniiVision 4000 X-Series Oscilloscopes

User's Guide

Triggers

A trigger setup tells the oscilloscope when to acquire and display data.

For example, you can set up to trigger on the rising edge of the analog

channel 1 input signal.

You can adjust the vertical level used for analog channel edge detection by

turning the Trigger Level knob.

In addition to the edge trigger type, you can also set up triggers on

rise/fall times, Nth edge bursts, patterns, pulse widths, runt pulses, setup

and hold violations, TV signals, and serial signals (if option licenses are

You can use any input channel or the

page 210 BNC as the source for most trigger types.

"External Trigger Input"

Show Quick Links

Table of Contents