Agilent Technologies 4000 X-Series User Manual page 185

3 Press the Source softkey, and turn the Entry knob to select the input
4 Press the Positive, Negative, or Either Runt Pulse softkey to toggle between
5 Press the Level Select softkey to select High; then, turn the Trigger Level
6 Press the Level Select softkey to select Low; then, turn the Trigger Level
7 Press the Qualifier softkey to toggle between "less than", "greater than",
8 If you selected the "less than" or "greater than" Qualifier, press the Time
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
channel source.
pulse types.
knob to adjust the high level.
knob to adjust the low level.
You can also push the Trigger Level knob to toggle between High and
Low selection.
or None.
This lets you specify that a runt pulse be less than or greater than a
certain width.
softkey; then, turn the Entry knob to select the time.
10
Triggers
185