Agilent Technologies 4000 X-Series User Manual page 57

6. Digital channel inputs
3. TRIG OUT connector
1.
2.
3.
4.
5.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
7. VGA Video Out
5. Calibration protect switch
4. 10 MHz REF connector
Power cord Attach the power cord here.
connector
Kensington This is where you can attach a Kensington lock for securing the
lock hole instrument.
TRIG OUT Trigger output BNC connector. See
connector Source"
10 MHz REF For synchronizing the timebase of multiple instruments. See
connector Reference Signal Mode"
Calibration See "To perform user calibration"
protect switch
2. Kensington lock hole
on page 339.
on page 339.
on page 342.
Getting Started
8. USB Host port
9. USB Device port
10. LAN port
1. Power cord connector
"Setting the Rear Panel TRIG OUT
"Setting the
1
57