Avaya Communication Manager Administrator's Manual page 1469

Hospitality (Basic)
Provides access to basic features including: Attendant Crisis Alert, Attendant Room Status,
Automatic Wakeup, Custom Selection of VIP DID Numbers, Do Not Disturb, Names
Registration, Single-Digit Dialing, and Mixed Station Numbering.
Hospitality (G3V3 Enhancements)
Software required for Property Management System and Automatic Wakeup. Property
Management System Interface activates Forward PMS Messages to INTUITY Lodging and
PMS Protocol Mode (transmit in ASCII mode). Cannot be set to y if the Hospitality (Basic) field
is n.
Usage Note: standard hospitality features are included in basic system software.
Internet Protocol (IP) PNC
This field is only for the Avaya S8700 Series IP-Connect-only port network connections and
only then should be set to y. If the configuration calls for fiber-connected only PNs, or if it
includes some port networks that are connected together with fiber and some port networks that
are IP-connect, this field should be set to n. This field cannot be set to y if:
the Asynch. Transfer Mode (ATM) PNC field is y
●
the PNC Duplication field is y
●
If fiber is administered
●
If the field is n, you can still add IP-connect port networks to the network. This field must be n if
you have or are integrating IP-connected port networks with direct/multi-connect configurations.
!
CAUTION:
If this field is set to y, then you cannot add direct-connect, CSS-connected, or
CAUTION:
ATM-connected port networks to the configuration. To integrate IP-connected
port networks with direct/multi-connect configurations, this field must be set to n.
IP Attendant Consoles
Controls permission to administer the IP Attendant Console.
IP Stations
Controls permission to administer H.323 and/or SoftPhone stations. Must be y for IP phones.
IP Trunks
Controls permission to administer H.323 trunks. Must be y for IP trunks.
System-Parameters Customer-Options
Issue 1 June 2005 1469