Avaya Communication Manager Administrator's Manual page 1605

Seize Ack Send (msec)
This field appears only if the Trunk Type field is dis and the trunk group Direction field is
incoming or two-way. Only TN2140 ports receive this timer.
Valid entries
10 to 990 in
increments of 10
Send Incoming/Outgoing Disconnect Timers to TN465 Ports
The field appears only for a co, fx, or wats trunk group.
Valid entries
y/n
END TO END SIGNALING
Pause (msec)
THis field is administrable only if the Trunk Type field is blank. All CO, DIOD, and tie circuit
packs that accept administrable timers accept this timer. However, this timer is sent only to the
following circuit packs: TN464B (or later), TN767, TN436B, TN459B, TN2146, TN2199, and
TN2242, and TN429 and TN2184 ports in a DID trunk group.
Valid entries
20 to 2550 in
increments of 10
Usage
Enter the duration of the seizure acknowledgment signal
your server running Communication Manager sends in
response to an incoming seizure.
Usage
Enter y if you want to send the incoming disconnect and
outgoing disconnect timer values to the trunk group
ports that are on a TN465 board.
Usage
Enter the minimum acceptable interval (pause) between
DTMF tones sent from a hybrid telephone.
Trunk Group
Issue 1 June 2005 1605