Avaya Communication Manager Administrator's Manual page 1464

Screen Reference
ASAI Link Plus Capabilities
Provides linkage between Avaya Communication Manager and adjuncts. If the ASAI Link Plus
Capabilities field is administered to y, then the following ASAI capability groups are enabled:
Adjunct Routing
●
Answering Machine Detection
●
Selective Listening
●
Switch Classified Outbound Calls
●
ISDN Redirecting Number Information - the original dialed number information is provided
●
within the ASAI messages if it arrives in ISDN SETUP messages from the public networks
as either Original Dialed Number or Redirecting Party Number.
Note:
ASAI Link Plus Capabilities only applies to links administered as type asai.
Note:
For more information, see the Avaya MultiVantage CallVisor ASAI Technical Reference.
Asynch. Transfer Mode (ATM) PNC
ATM PNC can be enabled only if:
all prior fiber-link administration has been removed
●
all "switch-node" and "dup-switch-node" carrier types have been removed
●
Asynch. Transfer Mode (ATM) Trunking
If ATM trunking is enabled, multiple ISDN-PRI T1 or E1 trunks can be emulated on one ATM
pipe. Can only be enabled if the ISDN-PRI field is set to y. Enables circuit emulation service
(CES).
ATM WAN Spare Processor
An ATM WAN spare processor acts as a PPN in the event of network failure, and can function
as an SPE if the main PPN is not functional. Cannot be set to y if the Async. Transfer Mode
(ATM) Trunking field is n.
ATMS
Provides for voice and data trunk facilities to be measured for satisfactory transmission
performance.
1464 Administrator Guide for Avaya Communication Manager