Avaya Communication Manager Administrator's Manual page 1428

Screen Reference
Valid entries
cesid
option
Restrict Last Appearance
Valid entries
y/n
1428 Administrator Guide for Avaya Communication Manager
Usage
Enter cesid to allow Communication Manager to send
the CESID information supplied by the IP Softphone to
the PSAP. The end user enters the emergency
information into the IP Softphone.
Use this entry for IP Softphones with road warrior
service that are near enough to the media server or
switch that an emergency call routed over the it's trunk
reaches the PSAP that covers the server or switch.
If the media server or switch uses ISDN trunks for
emergency calls, the digit string is the telephone
number, provided that the number is a local direct-dial
number with the local area code, at the physical
location of the IP Softphone. If the media server or
switch uses CAMA trunks for emergency calls, the end
user enters a specific digit string for each IP Softphone
location, based on advice from the local emergency
response personnel.
Enter option to allow the user to select the option
(extension, block, or cesid) that the user selected
during registration and the IP Softphone reported. Use
this entry for extensions that may be swapped back and
forth between IP Softphones and a telephone with a
fixed location.
The user chooses between block and cesid on the
softphone. A DCP or IP telephone in the office
automatically selects extension.
Usage
Enter y to restrict the last idle call appearance for
incoming priority calls and outgoing call originations
only.
2 of 2