Avaya Communication Manager Administrator's Manual page 1027

PMS LINK PARAMETERS
ASCII mode
The PMS Protocol Mode field must be transparent.
Valid entries
y/n
Milliseconds Before PMS Link Acknowledgment Timeout
This regulates how quickly the system responds to a message from the PMS (also known as
"pace timing.") This value is also used as the "inquiry message" (ENQ) time-out value. In most
cases, keep this as short as possible.
Valid entries
100 to 1500
PMS Link Maximum Retransmission Requests
Valid entries
1 to 5
PMS Link Maximum Retransmissions
Valid entries
1 to 5
Usage
Enter y when the ASCII-only mode is being used for the
PMS message set.
Usage
Enter the time in milliseconds the system waits for an
acknowledgment from the PMS indicating it correctly
received a message.
Usage
Enter the number of times that the server will allow the
PMS to request acknowledgment for a message that it
sent.
Usage
Enter the number of times that the server retransmits a
message to the PMS in response to a negative
acknowledgment, or sends an inquiry for acknowledgment
from the PMS before giving up on the message.
Hospitality
Issue 1 June 2005 1027