Avaya Communication Manager Administrator's Manual page 1101

Critical Reliable Bearer
Valid display
y/n
Enable Ethernet Pt?
Allows use of the ethernet port.
Valid entries
y/n
Gateway Address
Valid entries
0 to 255
IP Address
Display only, taken from the IP Node Names screen, based on the node name entered.
Valid entries
32-bit address
(4 decimal
numbers, each in
the range 0 to
255)
Usage
Default is n. A y entry indicates that two TN2602AP
circuit packs are duplicated in a port.
Usage
Enter y to iindicate that the Ethernet port associated with
the TN2602AP circuit pack is in service.
Note:
Enter n in this field before you make
Note:
changes on this screen.
Usage
This field is autopopulated with the value of the Gateway
IP address associated with the TN2602AP.
Usage
Displays the IP address of the interface.
IP Interfaces
Issue 1 June 2005 1101