Avaya Communication Manager Administrator's Manual page 1233

Flashhook Interval
Valid entries
y
n
Forward Disconnect Timer (msec)
Valid entries
25 to 1500 (in
increments of
25).
Lower Bound (msec)
The lower bound of the station-to-switch recall signal timing interval in milliseconds. Specifies
the lower bound of the flashhook interval. Appears when the Flashhook Interval field is y.
Valid entries
80 to 1250 (in
increments of
10).
MF Interdigit Timer (sec)
Applies only to multifrequency signaling trunks. Specify the maximum number of seconds
Communication Manager will wait for the first forward signal (digit) to arrive, and for subsequent
digits to arrive. Intercept returns to the calling party if this timer expires.
Valid entries
1 to 255
Usage
Enter y to indicate that a flashhook interval (recall
window) is required. If a y is entered, Upper Bound
and Lower Bound appear.
If n is entered, Disconnect Timing appears.
Usage
Specify the duration of a momentary disconnect sent
by the server/switch to an analog station user when
that user is the last party still off-hook on a call.
Usage
Specify the lower bound of the flashhook interval.
Usage
This number must be less than the number of seconds
entered in the short interdigit timer.
Location Parameters
Issue 1 June 2005 1233