Avaya Communication Manager Administrator's Manual page 1095

Field descriptions for page 2
Use this screen to assign the following characteristics to a codec set:
Whether or not Direct-IP Multimedia is enabled for videophone transmissions
●
Whether or not endpoints in the assigned network region can route fax, modem, or TTY
●
calls over IP trunks
Note:
For more information on modem/fax/TTY over IP, see Administration for Network
Note:
Connectivity for Avaya Communication Manager, 555-233-504.
Which mode the system uses to route the fax, modem, or TTY calls
●
Whether or not redundant packets will be added to the transmission for higher reliability
●
and quality
These characteristics must be assigned to the codec set, and the codec set must be assigned
to a network region for endpoints in that region to be able to use the capabilities established on
this screen.
!
CAUTION:
If users are using Super G3 fax machines as well as modems, do not assign
CAUTION:
these fax machines to a network region with an IP Codec set that is
modem-enabled as well as fax-enabled. If its Codec set is enabled for both
modem and fax signaling, a Super G3 fax machine incorrectly tries to use the
modem transmission instead of the fax transmission.
Therefore, assign modem endpoints to a network region that uses a
modem-enabled IP Codec set, and assign the Super G3 fax machines to a
network region that uses a fax-enabled IP Codec set.
IP Codec Set
Issue 1 June 2005 1095