Avaya Communication Manager Administrator's Manual page 1606

Screen Reference
Tone (msec)
This field appears only if the Trunk Type field is blank. All CO, DIOD, and Tie circuit packs that
accept administrable timers accept this timer. This timer is also sent to the following circuit
packs: TN464B (or later), TN767, TN436B, TN459B, TN2146, TN2199, TN429, TN2184 ports in
a DID trunk group.
Valid entries
20 to 2550 in
increments of 10
OUTPULSING INFORMATION
Break (msec)
Valid entries
Enter the duration of the break interval (the pulse duration) while the system
is outpulsing digits using dial pulse signaling. The field cannot be blank.
20 to 80 in
increments of 5
10 to 40 in
increments of 5.
1606 Administrator Guide for Avaya Communication Manager
Usage
Enter the duration of a DTMF tone sent when a button
on a hybrid telephone is pressed.
Usage
If PPS field is 10, the sum of the Make (msec) and
Break (msec) fields must equal 100.
If the PPS field is 20, the sum of the Make (msec) and
Break (msec) fields must equal 50.