Avaya Communication Manager Administrator's Manual page 1012

Screen Reference
Note:
This field is for a DCP bridged appearance LED color and flash rate when a call
Note:
on a bridged appearance is put on hold by another party on the DCP bridged
appearance. Additionally, this field only applies to 8400 and 6400 series phones.
The 2400 series phone uses icons rather then LEDs. Correct operation in the
Japanese environment requires the administrator to select the values red and
flash for this field.
Valid entries
green or red
off
wink
inverse-wink
flash
flutter
broken-flutter
steady
Other Stations When Call Is Active
Use this field to control a DCP bridged appearance LED for those non-active parties with a
bridged appearance that is active. The default value is green.
Note:
This field only applies to 8400 and 6400 series phones. The 2400 series phone
Note:
uses ICONs rather then LEDs. Correct operation in the Japanese environment
requires the administrator to select the value red for this field.
Valid entries
green or red
1012 Administrator Guide for Avaya Communication Manager
Usage
Indicate the color of the LED. Default is green.
Select the flash rate for the LED. Default is wink.
Usage
Select the LED color. Default is green.