Avaya Communication Manager Administrator's Manual page 1360

Screen Reference
SCCAN
This field appears when Enhanced EC500 on the System Parameters - Customer Options
screen is set to y.
Note:
When the SCCAN field is set to y, non-SCCAN-associated fields are hidden.
Note:
Only the Pattern Number, Pattern Name, SCCAN, Secure SIP, and Grp No
fields appear.
Valid entries
y/n
Secure SIP
Valid entries
y/n
Service/Feature
Enter up to 15 characters to identify the Service/Feature carried by the information element (IE)
in a call in this route pattern. This field is required by Call-by-Call Service Selection, and
Network Call Redirection and Transfer.
Service/Feature appears when ISDN-PRI or ISDN-BRI Trunks is y on the
System-Parameters Customer-Options screen.
Valid entries
accunet
i800
1360 Administrator Guide for Avaya Communication Manager
Usage
Enter y to indicate that this route pattern supports
incoming SCCAN calls.
Usage
Specify whether the SIP or SIPS prefix will be used, if
the call is routed to a SIP trunk preference. If SIP trunks
are not specified on the Route Pattern screen, the call
will be routed over whatever trunk is specified.
Therefore, to ensure a SIP TLS connection when such
a route-pattern is invoked, only SIP trunks should be
specified. Default is n.
multiquest
operator
sdn (Enter to allow
Network Call Redirection/
Transfer)
sub-operator
1 of 2